Got lots done this weekend

I finally got some time to work on the exhaust system this weekend.  A few weeks ago I got a set of Hedman headers and a full exhaust kit from Pypes.  I ordered both from Mustangs Unlimited.  After the big parts got in, I realized I needed a few more smaller parts.  First was the header reducers.  The ones that came with the headers were for 2.25 inch pipes, but my pipes kit is 2.5 inch.  I called Hedman to get the right part number, and made the order with Summit Racing.  Those parts got here on Thursday.

I also ordered some band clamps direct from Pypes.  I got these since I do plan on disassembling the car later, so the exhaust system needs to come out.  Therefore i do not want to weld anything yet, and I do not want to use normal U-clamps since they pinch the pipe and make it difficult, if not impossible to remove later.

So this weekend I got the old exhaust system out, and got the new headers in.  I also got the new power steering pump installed, which was a real pain since it weighs around 50 lbs (at least it feels that heavy!).  Also reinstalled the power steering pump and hoses.

I ran out of time and energy to get the rest of the exhaust system in, so I ran the break-in procedure for the VHT paint on the headers, which was idle for 10 minutes, cool for 20, idle for another 20 minutes, then cool for 20 again.  Car sounds cool with no mufflers, just the open headers.

Here are some pics and a video during the first burn-in for the paint.